Home Products Products by Type Vibration Hour Meters
Checkout/Complete Order » Back to Products by Type Products
Vibration Hour Meters

Larger Image

Vibration Hour Meters

The new SenDEC 806-6xx Series is the easiest way to measure the run time of any equipment that vibrates during operation. No wires! The meter is activated by vibration and accumulates hours as long as the equipment is vibrating. These meters are also available with SenDEC Flash Alert™ that flashes required maintenance at preset intervals. The self-contained power source ensures continuous display of total run hours. Epoxy encapsulation protects this meter and seals out the harshest environments. Wireless installation is fast and easy. Operation is fully automatic.

 

Features

  • When equipment vibrates, the meter counts running hours
  • No wiring or electrical hookup required
  • Three sensitivity levels depending on mounting
  • Records & Displays to 9,999.9 Hrs. Resolution: 0.1 Hour
    OR
  • Records & Displays to 99,999 Hrs. Resolution: 1 Hour
  • Modern LCD display is always readable, even when equipment power is off
  • Available with SenDEC Flash Alert™ service reminders
  • Completely potted and sealed to withstand the harshest environments
  • Hour Glass symbol flashes to indicate counting time.
  • Automatic Rollover
  • Quartz Accuracy: +/- 0.02% (over entire voltage and temperature range) indicated counting time.
 

Specifications

  • Operating temperature: -40F to 160F (-40C to 71C)
  • Shock: SAE J1378 55g
  • Vibration: SAE J1378 20g
  • Humidity: SAE J1378 95% RH
  • 100% Epoxy encapsulated
  • Case Material: ABS, black or white
  • Weight 1 oz
  • Warranty: Two years for OEMs
  • Waterproof to 70' below surface
  • UL & CUL recognized, CE approved
 

Operation

Flash Alerts

Flash AlertEquipment manufacturers all recognize the importance of performing preventive maintenance. Basic maintenance extends the life of equipment and reduces operating costs and down time due to equipment failure. Flash Alert service alarms make it simple to track maintenance needs and be sure that services are performed at the correct time.

Flash Alert service alarms can be tailored to specific applications and up to 3 service alarms can be programmed into SenDEC's NewGen series meters. Some of the messages available include:

  • CHG OIL
  • SVC AIR FILTER
  • CHG AIR FILTER
  • CHG HYD OIL
  • CHG HYD FILTER
  • CHG HYD OIL & FILTER
  • SVC ENG
  • SVC MOW
  • CHG FUEL FILTER
  • CHG BELT
  • OIL CAN ICON
  • AIR FILTER ICON
  • WRENCH ICON
 

OEM Options

  • Flash Alert programming - informs user "What to Service & When"
  • Key Kancel - Manual reset via key or wand
  • Input Reset - User toggles input for reset
  • Custom Pad Printing
  • Custom Bezels
  • Terminations: Wire, stud, screw, or spade
  • Packaging: Blister cards, individual box kits, bulk trays, poly bagged, or special kits
  • Custom Logos and programming available
 

Installation

All dimensions in inches. To print figures individually, right-click on the image and save to your local computer.

1. Find a convenient mounting location. DO NOT mount over magnetic surfaces. DO NOT mount meter where surface temperature exceeds 125 degrees F. As a general guideline, if you can place your hand on the mounting surface without discomfort while equipment is at full operating temperature, then it's not too hot for the meter. 

2. Use drill template (Fig. 1) to locate mounting holes. 

CAUTION: DO NOT DRILL INTO GAS TANKS OR ENGINE CRANKCASE. If in doubt, contact your dealer.
3. Mounting will determine sensitivity of the meter. In most applications, the appropriate mounting sensitivity can be easily achieved. See Fig. 2 for mounting sensitivity options.
CAUTION: Only qualified personnel should make electrical connections. Disconnect power prior to working on electrical circuits. Failure to follow normal electrical guidelines may result in damage to equipment and/or serious bodily injury.

 

 

 
Part Number Description Price Price for 10 Price for 25  
806-601-1031 Surface mount vibration activated hour meter
$104.95
$89.21
$83.96
Quantity:
OEM Custom Engineered Products and OEM Quantities Available.

Mechanical Drawings